Heating and Cooling System*

Honda Crosstour / Honda Crosstour 2010-2026 Owner's Manual / Controls / Heating and Cooling System*

Using Vents, Heating and A/C

■Heating

■Heating

The heater uses heat from the engine coolant

The heater uses heat from the engine coolant to warm the air.

1. Adjust the fan speed using the fan control dial.
2. Select 3. Adjust the temperature using the.
3. Adjust the temperature using the temperature control dial.

When you select automatically, the mode automatically switches to fresh air.

■ To rapidly warm up the interior<> 1. Set the fan to the maximum speed.
2. Select 3. Set the temperature to maximum warm..
3. Set the temperature to maximum warm.
4. Press the on). button (the indicator on).

Change to fresh air mode as soon as the interior gets warm enough. The windows may fog up if kept in recirculation mode.

■ To dehumidify the interior
 When used in combination with the heater, the air conditioning system makes the interior warm and dry and can prevent the windows from fogging up.

1. Adjust the fan speed using the fan control dial.
2. Press the A/C button to turn on the air conditioning.
3. Select 4. Adjust the temperature using the temperature control dial.
4. Adjust the temperature using the temperature control dial.

■Cooling

1. Adjust the fan speed using the fan control

1. Adjust the fan speed using the fan control dial.

2. Select .

3. Adjust the temperature using the temperature control dial.

4. Press the A/C button (the indicator on).

■ To rapidly cool down the interior<> 1. Set the fan to the maximum speed.
2. Set the temperature to maximum cool.
3. Press the on). button (the indicator on).

If the interior is very warm, you can cool it down more rapidly by partially opening the windows.

■Defrosting the Windshield and Windows

Pressing the button turns the air

Pressing the conditioning system on and automatically button turns the air conditioning system on and automatically switches the system to fresh air mode.

For your safety, make sure you have a clear view through all the windows before driving.

Do not set the temperature near the upper or lower limit.

When cold air hits the windshield, the outside of the windshield may fog up.

If the side windows fog up, adjust the vents so that the air hits the side windows.

■ To rapidly defrost the windows<> 1. Set the fan to the maximum speed.
2. Press the 3. Press the button (the indicator button.
3. Press the on). button (the indicator on).
4. Set the temperature to maximum heat.

After defrosting the windows, switch over to fresh air mode.

If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.

    See also:

    Authorized Manuals
    For U.S. Owners: The publications listed below can be purchased from Helm Incorporated. You can order a manual by phone at (800) 782-4356 (credit card orders only), or online at www.helminc.com. M ...

    Ignition Switch
    The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III). LOCK (0) - You can insert or remove the key only in this position. To turn the key, the shift lever mus ...

    Parts and Fluids Used in Maintenance Service
    The use of Honda genuine parts and fluids is recommended when maintaining and servicing your vehicle. Honda genuine parts are manufactured according to the same high quality standards used in Honda ...