Starting the Engine

Honda Crosstour / Honda Crosstour 2010-2024 Owner's Manual / Driving / When Driving / Starting the Engine

Models without smart entry system

1. Make sure the parking brake is applied.

1. Make sure the parking brake is applied.

2. Check that the shift lever is in

2. Check that the shift lever is in depress the brake pedal., then depress the brake pedal.
- Although it is possible to start the vehicle in ., it is safer to start it in Keep your foot firmly on the brake pedal when.

Keep your foot firmly on the brake pedal when starting the engine.

The engine is harder to start in cold weather and in thinner air found at altitudes above 8,000 feet (2,400 meters).

When starting the engine in cold weather, turn off all electrical accessories such as the lights, heating and cooling system*/climate control system*, and rear defogger in order to reduce battery drain.

If you live in a region where winter is extremely cold, an engine block heater will improve starting and warming of the engine. If temperatures consistently below -22°F (-30°C) are expected, the coolant mixture should be charged to a higher concentration to prevent freezing. Consult a dealer for details.

If the exhaust system sounds abnormal or you can smell exhaust gas inside the vehicle, have your vehicle checked by a dealer. There may be a problem with the engine or exhaust system.

3. Turn the ignition switch to START

3. Turn the ignition switch to START without depressing the accelerator pedal. without depressing the accelerator pedal.

■Starting to Drive

1. Keeping your right foot on the brake pedal, release the parking brake. Check that the parking brake indicator has gone off.
2. Put the shift lever in when reversing.. Select 3. Gradually release the brake pedal and gently depress the accelerator pedal to when reversing.
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull away.

Do not hold the key in START (e for more than 15 seconds.

• If the engine does not start right away, wait for at least 10 seconds before trying again.
• If the engine starts, but then immediately stops, wait at least 10 seconds before repeating step 3 while gently depressing the accelerator pedal.

Release the accelerator pedal once the engine starts.

The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled.

Models with smart entry system

1. Make sure the parking brake is applied.

1. Make sure the parking brake is applied.

2. Check that the shift lever is in

2. Check that the shift lever is in depress the brake pedal., then depress the brake pedal.
- Although it is possible to start the vehicle in ., it is safer to start it in Keep your foot firmly on the brake pedal when.

Keep your foot firmly on the brake pedal when starting the engine.

The engine is harder to start in cold weather and in thinner air found at altitudes above 8,000 feet (2,400 meters).

When starting the engine in cold weather, turn off all electrical accessories such as the lights, climate control system, and rear defogger in order to reduce battery drain.

If you live in a region where winter is extremely cold, an engine block heater will improve starting and warming of the engine. If temperatures consistently below -22°F (-30°C) are expected, the coolant mixture should be changed to a higher concentration to prevent freezing. Consult a dealer for details.

If the exhaust system sounds abnormal or you can smell exhaust gas inside the vehicle, have your vehicle checked by a dealer. There may be a problem with the engine or exhaust system.

The immobilizer system protects your vehicle from theft.

If an improperly coded device is used, the engine’s fuel system is disabled.

3. Press the ENGINE START/STOP button

3. Press the ENGINE START/STOP button without depressing the accelerator peda

■Stopping the Engine

You can turn the engine off when the vehicle is completely stopped.

1. Shift to .

2. Press the ENGINE START/STOP button.

■Starting to Drive

1. Keeping your right foot on the brake pedal, release the parking brake. Check that the parking brake indicator has gone off.
2. Put the shift lever in when reversing.. Select 3. Gradually release the brake pedal and gently depress the accelerator pedal to when reversing.
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull away.

Bring the smart entry remote close to the ENGINE START/STOP button if the battery in the smart entry remote is weak.

The engine may not start if the smart entry remote is subjected to strong radio waves.

Do not hold the ENGINE START/STOP button to start the engine.

If the engine does not start, wait at least 10 seconds before trying again.

    See also:

    Audio System
    An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle’s audio system. Audio System ...

    Handling the Unexpected
    This chapter explains how to handle unexpected troubles. ...

    Vehicle Identification Number (VIN)
    Your vehicle has a 17-digit vehicle identification number (VIN) used to register your vehicle for warranty purposes, and for licensing and insuring your vehicle. See the image below for the VIN loca ...