Automatic Lighting Control
Automatic lighting control can be used when the ignition switch is in ON
.
When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.
You can change the auto light sensitivity setting.
See also:
Reporting Safety Defects (U.S. Vehicles)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway Traffic
Safety Administration (NHTSA) in ...
Front Turn Signal/Parking Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal/Parking: 24/2.2CP
Driver side
6-cylinder models
1. Unlock the holding clips, then remove the
upper part of the air intake duct and the ...
Opening and Closing the Moonroof
Opening/Closing the Moonroof
You can only operate the moonroof when the ignition switch is in ON
. Use the switch in the front of the
ceiling to open and close the moonroof.
Automatic operation
...