Shifting
Change the shift position in accordance with your driving needs.
Shift lever positions
Shifting
You cannot turn the ignition switch to LOCK
and remove the key unless the
shift lever is in
.
The vehicle may move forward very slightly even in
while the engine is cold. Depress
the brake pedal firmly and, when necessary, apply the parking brake.
Shift Lever Operation
Shift Lever Operation
NOTICE
When you change the shift lever from
to
and vice versa, come to a complete
stop and keep the brake pedal depressed. Operating the shift lever before the vehicle
has come to a complete standstill can damage the transmission. Use the shift lever
position indicator to check the lever position before pulling away. Whichever position
the shift lever is in when driving, a blinking D indicator indicates a transmission
problem. Avoid sudden acceleration and have the transmission checked by a dealer
as soon as possible. The fuel supply may be cut off if you drive at engine speeds
in or over the tachometer's red zone (engine speed limit). If this happens, you
may experience a slight jolt. It may not be possible to operate the shift lever
if the brake pedal is applied while the shift lever release button is held down.
Depress the brake pedal first.
See also:
Display Setup
You can change the brightness or color theme of the audio/information screen.
■Changing the Screen Brightness
1. Press the DISP button to go to the Settings
screen.
2. Rotate to select Sy ...
Audio Remote Controls
Allows you to operate the audio system while driving.
MODE Button
Cycles through the audio modes as follows:
VOL Button
Press : Increases the volume.
Press : Decreases the volume. ...
Tire Pressure Monitoring System (TPMS)
• TPMS monitors tire pressure.
• TPMS is turned on automatically every time you start the engine. ...